Stay Charged! Please wait Registration FAQ Contact. Search Advanced Search Search Tips. Check the water-liquid electrolyte level. If the level is low or has ever been below top of plates, severe lead plate sulfation has taken place. Refill each cell with distilled water only to the liquid level indicator found in each cell.
Before proceeding further you must be thoroughly familiar with the safety and operating instructions. Recharge the battery with the BatteryMINDer battery charger desulfator to ensure that it is slowly and completely charged before you determine its condition. Allow battery to " REST " overnight for a minimum of 12 hours. See the Specific Gravity - Capacity chart below for more information. Allow battery to remain in maintenance mode for a minimum of 72 hours, before re-test. Any battery discharge, including internal discharge, produces sulphation on the battery plates as part of the chemical cycle, and given enough time, this sulphation hardens, causing diminished battery capacity at best, or total loss of function.
Routine charging after use, or use of a "floating" charger for long periods of storage boat batteries, ATVs, etc. Lab and field tests by individuals, companies and government agencies around the world have proven that Pulse Technology works. It is literally the most effective method available for ensuring lead-acid battery performance, increasing battery efficiency and reducing battery-related costs.
Today, they offer over 60 products designed to help you reduce battery-related problems and costs. While we don t carry all 60 products in stock, we have access to them. To get an idea of exactly how important pulse technology is to the performance of all your vehicles, consider this: The main cause of vehicle failure is battery failure due to sulfation buildup on the battery plates. And Pulse Technology prevents sulfation buildup. In most cases, your battery is still good. You just can't reach the energy inside.
That means you have to buy another battery even though the one you have may still be usable. PulseTech products help prevent this problem.
PulseTech products connect directly to the battery. They emit a pulsating dc current that removes the sulfate deposits from the plates and returns them to the battery acid as active electrolyte.
When installed permanently, these products also help keep sulfates from building up again so your battery is in peak condition all the time. In most cases, some of these products even help renew dead batteries already suffering from sulfation buildup and help bring them back to life. It is a process where a medium is used to get rid of the sulfate crystals drop them back to the electrolyte to be dissolved.
If successful, the battery plates will be freed up from the buildups that prevent them from storing charge. The main problem with the sulfate phenomenon is the sulfate crystals preventing the plates from storing energy. When the buildups on the plates, the sulfate crystals, are reduced into electrolytes, the battery will have to regain its capacity because its plates can store more energy.
Earlier, I also mentioned something about different methods of desulfating a battery. Generally, the process is carried out using a device, but there are several alternative ways to do it, as some experts claim.
To learn more about the three methods used to desulfate car batteries according to experts, you can refer to the list below. Today, the considered conventional way of desulfating a lead-acid battery is the method that uses a device called battery reconditioner or desulfator. It is a method where the device generates pulses with high-frequency and use them to zap the sulfate buildups on the battery plates. This drops the sulfate crystals to the electrolyte to dissipate freeing up the plates, allowing them to store more energy.
It is a process where an agent for desulfation is involved and letting it do its magic. It is a process carried out to try and restore the capacity of a lead-acid battery lost due to sulfation. This procedure also enables dead cells to breathe a new lease of life through this battery operation. In other words, the process eliminates battery sulfation.
The process of desulfating your battery may take 48 hours or more, or even a couple of weeks if extreme sulfation has occurred. When the sulfation condition on a common car battery is not too severe, the reconditioning process will be streamlined considerably. In some cases, the battery can desulfate in a few hours after using a good 12v smart charger.
Desulfation may take a day or even two days if the sulfation is particularly heavy. Due to the trickle charge property, it will only require a few charges to restore its functioning.
When desulfating a battery, the time that it will take to complete the process will vary depending on a variety of factors:. A desulfated battery lasts longer. The longer a battery lasts, the less money you have to spend on new batteries.
Replacing batteries can get expensive, especially if you have to replace six or eight batteries as in a solar energy setup. Batteries that have been desulfated are stronger. The electrical system is able to run more efficiently and more consistently with a strong battery. Desulfated batteries provide greater power and consistency across a wide range of applications, from boats to cars to trucks to lawnmowers, without compromising the intended purpose.
By using a desulfator, you can dissolve the sulfur accumulating in your battery. During this process, current passes through the sulfate buildup. The build up then drops into the battery acid and dissolves. Battery damage does not occur during this process. Among the three methods, this one is particularly effective and reliable for desulfating batteries. Epsom salt is the primary medium used in this desulfation process.
As a result, Epsom salt is considered a rechargeable battery cleanser because it can eliminate the buildup of sulfate within the battery.
0コメント